Scientific Division
Centrifuge & Refrigerate Centrifuge
⭐️ Reliable high-speed centrifugation
Tomy MDX delivers stable and reproducible centrifugation performance for routine laboratory applications.
⭐️ Compact design, easy operation
Designed for space-limited laboratories, featuring a rack-in-rotor system with stackable capacity up to 72 × 1.5–2.0 mL tubes. Drop-in / lift-out rotor racks allow easy placement and removal, improving daily workflow efficiency.
⭐️ Pre-temperature function for sample integrity
The pre-temperature function allows the rotor and chamber to reach the target temperature before centrifugation, helping protect temperature-sensitive samples and ensure consistent results.
| Model | MDX-310 | MDX-210 | MDX-110 |
|---|---|---|---|
|
Maximum Speed |
15,000rpm |
||
|
Maximum RCF |
21,890G |
20,380G |
20,380G |
|
Maximum Capacity |
50ml × 4 |
30ml × 6 |
2(1.5)ml × 24 |
|
Speed Control System |
Microprocessor feedback control |
||
|
Drive Motor |
Induction motor |
||
|
Data Entry |
Jog Dial with ENTER key and Touchscreen Numeric keypad available |
||
|
Temperature Setting Range |
From -9°C to +35°C (1°C increment) |
||
|
Speed Setting Range |
300 to 15,000rpm (100rpm increments) |
||
|
RCF Setting Range |
10 to Maximum RCF (Less than 300G: 10G increments, Over 300G: 100G increments) |
||
|
Time Setting Range |
10sec to 99min50sec (in 10sec increments) or (Free) for a continuous run |
||
|
Safety Devices |
Imbalance detector |
Over-speed detector |
|
|
Lid interlock |
Motor over-current detector |
||
|
Over-current circuit breaker |
Lid open / close detector |
||
|
Overheat / Overcool detector |
Rotor identification system |
||
|
Convenient Functions |
Last run memory |
Power saving (ECO) mode |
|
|
Soft Brake function |
Soft Brake function |
||
|
FLASH (Short spin) function |
Annual inspection indicator |
||
|
Memory function (six sets of operating parameters) |
|||
|
Heat exchanger overheat detector |
Calendar date & time display |
||
|
Refrigerant |
HFC R134a (260g) |
||
|
Power Requirements |
1-Phase AC120V 60Hz 15A
1-Phase AC220-240V 50 / 60Hz 10A |
||
|
Rated Current |
120V : 12A
220-240V : 7A |
120V : 12A
220-240V : 7A |
120V : 11A
220-240V : 6.5A |
|
Dimensions |
341 W × 491 D × 823 H mm
(Lid in open position：1138 H, table height：787 H) |
||
|
Net Weight |
62 kg |
||
|
Accessories Included |
Operator’s manual × 1copy, Digital Warranty Information × 1copy, Clear storage case for operator’s manual ×
1piece, Rotor fixing knob × 1piece,
Caster holder × 2pieces, Drain plug × 1piece, Attaching screw for clear case × 1piece, Power cord × 1piece, Hexagon wrench × 1piece |
||
| Model | CAX-571 |
|---|---|
|
Maximum Speed |
15,000rpm |
|
Maximum RCF |
21,130G |
|
Maximum Capacity |
1,000ml (250ml × 4) |
|
Control System |
Microprocessor control (feedback system) |
|
Drive Motor |
Induction motor |
|
Drive System |
Flex-Spin drive system (Direct drive with an automatic alignment function) |
|
Data Entry |
Jog Dial equipped with an button |
|
Temperature Setting Range |
From -9℃ to +35℃ (1℃ increments) |
|
Speed Setting Range |
100 to 15,000rpm (100rpm increments) |
|
RCF Setting Range |
10 to 21,130G(10G increments for the range less than 300G,100G increments for the range over 300G) |
|
Time Setting Range |
From 10 sec to 50 sec, in 10 sec increments, from 1 min to 99 min, in 1 min increment or for free |
|
Safety Devices |
Imbalance detector, Lid interlock, Lid open / close detector, Abnormal speed detector,
Over-current circuit breaker, Rotor identification system, Motor over-current detector, Abnormally high or low chamber temperature detector. |
|
Additional Functions |
Three-step acceleration characteristics selection, Three memory function,
Three-step deceleration characteristics selection, FLASH (momentary spin) function, BART Code selection, Power saving (ECO) mode. Memory function for last run parameters. |
|
Refrigerant |
HFC R404A (250g) |
|
Rated Current |
6.5A |
|
Power Requirements |
1-Phase AC220 / 230 / 240V 50 / 60Hz 8A |
|
Power Consumption(Heat output) |
990W (851kcal / h) |
|
Breaker |
Rated breaking current 7.5A |
|
Protection Against Electric Shock |
Class I |
|
Dimensions(except protruding portion) |
462W × 542D × 884H mm (table height: 776H mm) |
|
Net Weight |
124kg |
|
Environmental Requirements |
Ambient temperature range:10 to 35℃, Relative humidity:30 to 85%, Atmospheric pressure:700 to 1,060hPa
Intended exclusively for use indoors, Overvoltage category: II, Pollution degree: 2 |
|
Accessories Included |
Operator’s manual × 1copy, BART Code table × 1pc, Clear storage case for operator’s manual × 1pc,
Attaching screw for clear storage case × 1pc, Digital Warranty Information × 1copy, Spanner × 1pc, Level gauge × 1pc, Rotor locking knob × 1pc, Drain plug × 1pc, Power cord × 1pc. |
| Model | Suprema 25 | Suprema 21 |
|---|---|---|
|
Maximum Speed |
25,000rpm |
21,000rpm |
|
Maximum RCF |
60,110G |
46,850G |
|
Maximum Capacity |
1,000ml × 6 tubes |
1000ml × 4 tubes |
|
Speed Control |
Microprocessor |
|
|
Motor |
Induction Motor |
|
|
Drive System |
Direct Drive |
|
|
Data Entry |
Jog Dial |
|
|
Speed Setting Range |
0 to 25,000rpm
(100rpm increments) |
0 to 21,000rpm
(100rpm increments) |
|
RCF Setting Range |
0 to 60,110G
(10G increments) |
0 to 46,850G
(10G increments) |
|
Temperature Setting Range |
-9 to 35°C (1°C increment) |
|
|
Time Setting Range |
0 to 50sec. (10sec. increments) , 0:01 to 9:59 (1min. increment) , 10 to 24hours (1hour increment) , Free |
|
|
Acceleration / Deceleration Setting |
Acceleration: 10 steps, Deceleration: 10 steps and Free |
|
|
Memory Function |
3 Memories for each rotor with Memory Keys and 99 Memories with Menu Key |
|
|
Program Operation |
Ο |
– |
|
RCF Integrated Operation |
Ο |
– |
|
Continuous Flow Rotor |
Ο |
– |
|
Other Function |
Rotor Speed Automatic Setting with BART Code, Radius Setting, Date and Time Display |
|
|
Safety Devices |
Lid Interlock System, Lid Open / Close Detector, Overspeed Detector, Imbalance Detector,
Overcurrent Detector, Rotor Identification System, Motor Overcurrent Detector, Temperature Error Detector |
|
|
Refrigerant |
HFC R404A |
|
|
Power Requirement |
1-Phase AC 220/230/240V 50/60Hz 30A |
|
|
Rated Current |
21A |
18A |
|
Power Consumption (Heat output) |
3.3kW (2,840kcal / h) |
2.6kW (2,240kcal / h) |
|
Dimensions W × D × H mm (Except projection) |
715W × 794D × 1,017H mm
(Height to Operation Table: 869H mm) |
570W × 794D × 1,018H mm
(Height to Operation Table: 869H mm) |
|
Net Weight |
265kg |
215kg |
|
Accessories Included |
Operator’s Manual 1, Digital Warranty Information 1, Inspection Sheet 1, Clear Case 1, Attachment Screw 1, Level 1, Special Tool for Continuous Flow Rotor Use（for Suprema25） 1, Rotor puller 1 |
|